Disinfection/decontamination with 70% isopropyl alcohol. Please use the appropriate PPE plus goggles, face protection and gloves. Carry out disinfection in a well-ventilated place and observe environmental protection. Please dispose of all consumables properly and wash hands thoroughly afterwards!
RESCUE SAW FOR LAMINATED GLASS, METAL & WOOD The rescue saws are indispensable for quick removal of laminated glass panes. The LES 18 also cuts metal, wood and plastic and is therefore perfectly suited for work after traffic accidents, in buildings, off-road or on turntable ladders. Scope of delivery: LES 18 rescue saw with 18 V battery, ...
RELIABLE AGAINST LATE DEPLOYMENT OF AIRBAGS - FOR MAXIMUM PROTECTION OF ACCIDENT VICTIMS AND RESCUERS! The LUKAS Air Bag Safes protect the driver and passenger side against airbags that are triggered late. The set includes two different airbag safe sizes: One Air Bag Safe is intended for the steering wheel in sizes from 35 to 39 cm. The ...
STANDARD RAM - LARGE The single-stage standard ram series is completely matched to each other with sizes and extension lengths. The smaller ram creates an opening into which the next larger ram is then inserted. The R 414 has an extended length of 1600 mm. This means a minimum overall height with comparatively large stroke. The claws can ...
The StrongArm clears every path. It is the LUKAS multitool. An all-purpose weapon and the pioneer for every application. LUKAS offers a wide range of accessories to ensure that your StrongArm is also well equipped. In addition to the battery and the charger, there are also door-opener tips, combination tips, a backpack, a carrying strap ...
STABLE AND NON-SLIP The LUKAS LRS-C is a stable and non-slip support bearing that can be adapted to the respective vehicle type. By adjusting the opening width it can be used for all sill heights between 140 and 250 mm. During application, the LRS-C clings to the sheet metal of the vehicle and thus offers maximum safety when working.
THE COMPACT GIANT FOR REAL USE The R421 E2 is the world's first telescopic cylinder with eDRAULIC technology! It is therefore perfectly geared to your real needs in real applications. This means for you: maximum stroke - minimum overall height - full freedom of movement. Longer, higher, further: With this all-rounder you can work ...
The LUKAS Support System allows for safe stabilizing of vehicles and supporting of lifted loads during rescue operations. This prevents further movement of the vehicle during the rescue. Consists of: 2x Block 9 x 9 x 1 in. / 230 x 230 x 25 mm 2x Block 9 x 9 x 2 in. / 230 x 230 x 50 mm 2x Block 9 x 9 x 3 in. / 230 x 230 x 75 mm 2x Wedge 9 ...
FOR THE PROTECTION OF THE RESCUERS In this way you can effectively protect your rescue team from injuries in sharp-edged areas with little effort. The protective bags are placed on the cut-off ends of the vehicle columns and securely fastened with Velcro tape. The protective covers are used anywhere on the bodywork to cover sharp edges, ...
STANDARD RAM - MEDIUM SIZE The single-stage standard ram series is completely matched to each other with sizes and extension lengths. The smaller ram creates an opening into which the next larger ram is then inserted The R 412 has an extended length of 1180 mm. This means a minimum overall height with comparatively large stroke. The ...
The StrongArm clears every path. It is the LUKAS multitool. An all-purpose weapon and the pioneer for every application. LUKAS offers a wide range of accessories to ensure that your StrongArm is also well equipped. In addition to the battery and the charger, there are also door-opener tips, combination tips, a backpack, a carrying strap ...
FOR VERTICAL AND HORIZONTAL POSITIONS The LRS-T provides safe and stable support in both vertical and horizontal positions. It contains three fully loadable abutments for three different support widths.
SINGLE PISTON CYLINDER R 410 E2 FOR MINIMUM RETRACTED HEIGHT With a retracted length of only 539 mm, the R 410 E2 fits into even the smallest insertion opening. It thus fulfils the requirement of DIN 14751 for an overall length
The LUKAS Support System allows for safe stabilizing of vehicles and supporting of lifted loads during rescue operations. This prevents further movement of the vehicle during the rescue. Consists of: 4x Block 9 x 9 x 1 in. / 230 x 230 x 25 mm 4x Block 9 x 9 x 2 in. / 230 x 230 x 50 mm 4x Block 9 x 9 x 3 in. / 230 x 230 x 75 mm 4x Wedge 9 ...
FOR THE PROTECTION OF THE RESCUERS In this way you can effectively protect your rescue team from injuries in sharp-edged areas with little effort. The protective bags are placed on the cut-off ends of the vehicle columns and securely fastened with Velcro tape. The protective covers are used anywhere on the bodywork to cover sharp edges, ...
STANDARD RAM - SMALL SIZE The single-stage standard ram series is completely matched to each other with sizes and extension lengths. The smaller ram creates an opening into which the next larger ram is then inserted. The R 410 has a minimum overall height with a comparatively large stroke with 750 mm extended length. The claws can be ...
The StrongArm clears every path. It is the LUKAS multitool. An all-purpose weapon and the pioneer for every application. LUKAS offers a wide range of accessories to ensure that your StrongArm is also well equipped. In addition to the battery and the charger, there are also door-opener tips, combination tips, a backpack, a carrying strap ...
HYDRAULIC LIFTING AND RESCUE One motor pump, two applications! If loads also have to be lifted during rescue work using scissors, spreaders or rescue rams, the patented MSM-2D allows two heavy duty lifting cylinders to be connected to the power pack. For example, to lift crashed trams, subways, trucks, buses or trains. The heavy-duty ...
THE WORLD'S FIRST 3-STAGE RESCUE RAM As the world's first manufacturer and with decades of experience, LUKAS developed a three-stage rescue ram that makes rescue even faster. With this ram, you can cover a huge lifting distance in a single operation during rescue work in road, rail and air traffic. This saves you valuable time. The R 430 ...
The LUKAS Support System allows for safe stabilizing of vehicles and supporting of lifted loads during rescue operations. This prevents further movement of the vehicle during the rescue. Consists of: Step chog 27 x 5.9 x 10.8 in. / 690 x 150 x 276 mm Keg 9 x 4.7/3 x 4.7 in. / 230 x 120/57 x 120 mm Dimensions L x W x H
RELIABLY KEEPS GLASS SPLINTERS AWAY FROM ACCIDENT VICTIMS The LUKAS shatter protection reliably keeps glass splinters away from the accident victim and is therefore indispensable for a patient-friendly rescue. Depending on the accident situation and the condition of the injured person, it can be used with a transparent window or with a ...
POWER PACK WITH MAXIMUM LENGTH The LUKAS rescue rams not only impress with a convincing lifting power, a particularly firm grip thanks to the "claw geometry" and a particularly long stroke, they can also be used flexibly. For example, our telescopic rescue cylinders are available in three different lengths, which can be used as required. ...
CREATES ORDER AND CLARITY IN USE A multifunctional tarpaulin made of tear-resistant, waterproof and dirt-repellent fabric. It is used, among other things, as a central storage area for all rescue tools during rescue operations and makes the operation clearer, clearer and therefore safer.